AUTONET TV

Power Steering Pump Replacement

When you’re driving and you hear a squeal or groan when you turn, it may be a sign your power steering pump is on its last legs.  The same is true if you feel your steering is slipping or doesn’t respond to your hands like it used to.  

Precise, responsive steering is, of course, important when it comes to safe driving, so this is something you should have one of our technicians look at sooner rather than later.  

There are different types of power steering pumps, and they all perform a similar function.  They make it easier for you to turn the steering wheel with little effort as the power steering system multiplies that force so you can precisely aim a vehicle that weighs thousands of pounds.  

The type of power steering pump your vehicle has depends on the power steering system it uses.  One works by hydraulics, taking energy provided by belts driven by the engine which pressurizes power steering fluid to the wheels.  There are a lot of components in these systems, and they can wear out more quickly than some other systems.

Another power steering system works on electricity, which is more fuel efficient and produces fewer emissions.  It works on electrical power created by the vehicle’s electrical system and doesn’t put as much of a load on the engine.  With electric power steering systems, your vehicle can change how the steering feels or responds in different driving conditions.

When your power steering system isn’t working correctly, a technician will determine where the problems are.  Not only could it be the power steering pump, but there are several other parts that may be contributing to your steering issues.  That may include leaks in hoses and seals, faulty belts and corrosion in electrical components and connections. 

When you feel the steering in your vehicle doesn’t have the solid, smooth silent response it used to have, bring it in so a technician can diagnose the problems and steer you back in the right direction.

High-Tech Auto and Truck Center
4007 Westfax Drive
Chantilly, VA 20151
7039686648
http://high-tech-auto.com

How Tired Are Your Tires? (Tire replacement)

Of the things you think about most, your tires are probably pretty far down the list. That’s understandable because today’s tires are engineered to do their job without needing you to pay too much attention to them. But they DO wear out, and worn tires can contribute to skidding in bad weather, not being able to stop, a ride full of uncomfortable vibrations and, even a sudden blowout. Yikes. Let’s figure out right now how to know if your tires need replacing!

Let’s face it. Most of us don’t know the first thing about tires. So, the best way to make sure what shape yours are in is to take your vehicle to a qualified service facility to have the tires checked out by a trained technician.  Here are things they’ll check:

• Tread.  Tread is the part of the tire that touches the road surface.  Different tires have different tread patterns and something called tread blocks - the raised rubber parts that contact the road. The longer a tire has been on a vehicle, the more of that rubber wears off.  The technician will check to see if there’s enough of that tread left on your tire for sufficient traction to accelerate, steer, and brake.
• Pressure. It’s important your tires be inflated properly so your tires will perform the way they’re designed while driving.  If your tires have low air pressure, the technician will check to see why, perhaps cracks in the sidewall from age, a nail in the rubber picked up on the road, or bulges. It’s also important your tires are not overinflated too.
• Wear.  Your tires should wear evenly.  If they haven’t, the uneven wear can cause vibrations that you can feel in the steering wheel.  Maybe the whole vehicle shakes at a certain speed.  Your vehicle may require other services such as balancing, alignment, or suspension repairs to prevent future tire damage.
• Age.  Your tires may have adequate tread, but if they’re too old, it’s time for new. Rubber gets old, and when it does, it loses its elasticity.  Ever find an old rubber band and tried to stretch it? It’s brittle and will break easily. Hotter climates will age rubber—and tires—faster. All tires have their date of manufacture stamped on them, so your service adviser will be able to see when your tires were made.

If it’s time to replace your tires, you’ll find you have many choices for new ones: different brands, models, designs, etc.  Your service adviser can help you figure out which ones are right for you. It’s much better—and safer—to do it before one of them fails at the least opportune time.

High-Tech Auto and Truck Center
4007 Westfax Drive
Chantilly, VA 20151
7039686648
http://high-tech-auto.com

Not-So-Common Sense (Sensor Failures)

So your vehicle won't start.  What's the first thing that comes to mind?  Battery dead? Starter motor worn out? Out of gas?  Well, those are all reasons that make sense.  But your vehicle may be refusing to start because one of its computers is being warned that to do so might damage it.  Here's how that works.

You have lots of computers in your vehicle.  They need to know the status of things so there are several sensors monitoring various things going on.  These sensors send information to the computers that adjust the fuel and air mixture so you don't waste fuel.  They know when things aren't quite right and prevent you from starting your engine if that's going to damage it. 

Other sensors make sure the coolant is the right temperature, check to see you are not polluting the air and make sure other electronic components are performing their tasks correctly.

Here's an example of a sensor doing its job.  Your engine needs oil to lubricate metal components so the friction doesn't damage them.  Your engine has an oil pressure sensor that tells a computer called the Electronic Control Unit (ECU) if things are good to go or if there's something wrong, maybe the oil pressure is too low to keep things lubricated.  If it is, it gives a signal for the vehicle not to start, protecting the engine. 

Of course, the sensors can go bad, too, with some of the same results.  And so someone has to figure out if it's the sensor that's failed or if it really has detected a problem.  That is the challenge for technicians with specialized equipment to decipher the signs.  If a bad sensor is found, it may need to be replaced.  Sometimes a thorough cleaning can do the trick.  In either case, your service facility can track down the problem and get you back on the road.  Makes sense, doesn't it?

High-Tech Auto and Truck Center
4007 Westfax Drive
Chantilly, VA 20151
7039686648
http://high-tech-auto.com

The Daily Grind (Grinding Noise)

If your vehicle makes a grinding sound when you turn the steering wheel, it's speaking to you.  No, really, it is.  So listen to what it's saying and you could avoid a much more costly repair down the road.

A grinding sound coming from the front of your vehicle when you are turning can offer some very informative clues as to what's going on.  One cause could be that there's a problem with the mechanical linkage that enables you to turn the wheels.  Another is that the hydraulic system that makes turning the steering wheel easier may have its own problems. 

Think of it.  Hydraulic power steering has many components that need to work in tandem.  The power steering fluid may be too old and contaminated.  Or its level may be low. That may be caused by a leak somewhere in the system. A technician can check things over to find out exactly what's happening.

Other causes of grinding while turning can be problems with the suspension in the front.  You may have a failing CV (constant velocity) joint.  It could be your brakes are partially engaging while you are turning.  That metal-on-metal sound is never a sign that things are working just the way they're supposed to.

To a technician looking to pinpoint the problem with your vehicle, it's not a daily grind at all.  Experience and training will help her or him zero in on what's causing the noise and get you back on the road. Maybe you can enjoy your sound system more after that distracting background noise has disappeared!

High-Tech Auto and Truck Center
4007 Westfax Drive
Chantilly, VA 20151
7039686648
http://high-tech-auto.com

Do you have a Clue (Get the Most Out of a Service Visit)

When you head to the doctor, you probably have it in your mind what you're going to say about why you don't feel good.  That way your doctor can use that information to diagnose your problem. You might want to think of that same approach when you take your vehicle in for a repair.

Experts say what will help the service advisor most is for you to bring in some well-organized descriptions about your vehicle's issues.  You might even want to write them down so you don't forget.  Is there an unusual smell?  What does it smell like?  Does the problem happen first thing after starting out? If there's an odd sound you hear, is it dependent on speed?  Does it change when you turn a corner?  

Keep your expectations realistic.  Some conditions may take a long time to diagnose and repair.  If you go thinking you'll be in and out in no time, you might be disappointed when you're told there are other customers ahead of you and you may have to come back tomorrow.  If you can make alternate plans to have someone pick you up and take you back when the vehicle is finished, that way you won't feel like you've wasted your time. 

Most importantly, be available for any communication from the service advisor.  If they have your cell phone and they have a question or need an approval for a repair, the sooner they reach you, the sooner things can move forward. 

The service facility wants your experience with them to be good just as you do.  With a little help from you, they'll get your vehicle back on the road and you'll have a smile on your face.

High-Tech Auto and Truck Center
4007 Westfax Drive
Chantilly, VA 20151
7039686648
http://high-tech-auto.com